| Item # | Product Description | ||
;) |
Poulan Pro Chain Saw - 20" The right saw for the right job! This heavy duty chain saw with a 20" blade if great for those big jobs. Chainsaw features a 20" bar, a gear driven automatic chain oiler, an anti vibration handle, a patented tool-less quick adjust chain tightening system, carrying case, a 2.8 cubic inch, 46cc engine with Super CleanTM air filtration system. |
||
|
#SW0050 |
Poulan Pro Chain Saw - 20" |
||
;) |
Poulan Wild ThingTM Chain Saw - 18" This 18" chain saw has all the options you want. It features an 18" bar, a gear driven automatic chain oiler, a wide handle for better control, a patented tool-less quick adjust chain tightening system, carrying case, a 2.5 cubic inch, 40 cc engine with Super CleanTM air filtration system. The saw also features Effortless Pull Starting (EPS), a primer bulb for easy starting and a chain brake for reducing or stopping the chain. Not for sale in California. |
||
| #SW0051 |
Poulan Wild ThingTM Chain Saw - 18" |
||
;) |
Poulan Chain Saw - 16" This 16" chain saw is perfect for those small jobs. It features an 16" bar, a gear driven automatic chain oiler, a wide handle for better control, a patented tool-less quick adjust chain tightening system, a DuraLifeTM 2.5 cubic inch, 35 cc engine with Super CleanTM air filtration system. The saw also features Effortless Pull Starting (EPS), a primer bulb for easy starting and a chain brake for reducing or stopping the chain. |
||
| #SW0052 |
Poulan Chain Saw - 16" |
||
;) |
Troy-Bilt Chain Saw - 16" This 16" chain saw features electronic ignition, an automatic oiler, and anti-vibration handle, an inertia chain brake/hand guard, a carrying case and a 40cc engine. Saw comes with a two year limited warranty. |
||
| #SW0053 |
Troy-Bilt Chain Saw - 16" |
||
;) |
Chain Saw Sharpener This chain saw sharpener can be installed on your work bench or mounted to a wall. This sharpener features a 110V, 3600 RPM motor, a disc guard, a 15 watt lamp. Use this sharpener to sharpen chains from 1/4" to 3/4" pitch. |
||
| #SW0054 |
Chain Saw Sharpener |
||
;) |
Horizontal Log Splitter Split logs the easy way! This 2 HP 110V electric log splitter can deliver up to 5 tons of pressure and can easily split logs up to 20" long and up to 10" in diameter! This log splitter features 10" tires for easy moving, a rust resistant baked on finish, a 2.9L hydraulic oil capacity and a 1-3/16" cylinder with a 15-3/4" stroke. Splitter dimensions are 38.5" L x 11.8" W and 19.3" H. |
||
| #SW0055 |
Horizontal Log Splitter |
||
| Back To Top | |||
| Click on Photo to see bigger view! | |||
;) |
Timberjack - 3' Use this timberjack to lift your logs to prevent your chain saw blade from hitting the ground and dulling. Rigid stand removes for Cant Dog work. This timberjack will handle an 8" to 10" diameter log. |
||
| #SW0056 |
Timberjack - 3' |
||
;) |
Bench-Mount Chain Saw Sharpener Use this bench mounted chain saw sharpener to get your chains razor sharp. Sharpener runs on a 110V motor and runs at 5500 RPMs. Sharpener includes a grinding disc and chain saw sharpener. |
||
| #SW0057 |
Bench-Mount Chain Saw Sharpener |
||
;) |
Horizontal Log Splitter The perfect splitter for the homeowner or the hunter/camper! This 3.5 HP Briggs & Stratton powered log splitter can deliver up to 8 tons of pressure and can easily split logs up to 18" long and up to 10" in diameter! This log splitter features a 4" x 4" heavy duty steel beam frame with a 3/4" thick splitting wedge, a powder coat finish, a 2.7 GPM single stage pump with a 3" cylinder with a 18" stroke and an automatic return. |
||
| #SW0058 |
Horizontal Log Splitter |
||
;) |
Steel Skidding Tongs These heavy duty tongs are made of carbon steel and are designed to grab trees, logs or poles for skidding and dragging operations. The tongs feature a 1 1/8" ring with a jaw capacity from 5 1/2" to 32" wide. |
||
| #SW0059 |
Steel Skidding Tongs |
||
;) |
Metal Timberjack - 3' Use this timberjack to lift your logs to prevent your chain saw blade from hitting the ground and dulling. Rigid stand removes for Cant Dog work. Steel handle disassembles for easy transporting. |
||
| #SW0060 |
Metal Timberjack - 3' |
||
| Back To Top | |||
| Click on Photo to see bigger view! | |||
;) |
Wood Crib Keep your firewood stacked, dry and termite free. Rack attaches together with two 2 x 4's (not included), so you control the length of your wood rack. The ends are made of 1 inch round tubular steel with a moisture resistant baked-on finish. Steel ends are 13" W x 44" high. |
||
| #SW0061 |
Wood Crib |
||
;) |
Log Cart - 220-lb. Capacity Make getting wood to your fireplace easier. This 220 lb. capacity log cart has large spoked wheels (16" x 2.125") that easily move over rough terrain or up and down stairs. Log cart features a heavy duty galvanized steel frame with a bottom panel for catching bark and dirt to help keep down the mess of moving wood. The bed capacity of the log cart is 30" L x 20" W x 48" H. |
||
| #SW0062 |
Log Cart - 220-lb. Capacity |
||
;) |
3-Point Horizontal Log Splitter This log splitter attaches to your tractors 3-pt hitch and hydraulics to power this splitter. No separate engine or pump is required. Splitter comes with all hardware to attach to Category I tractors. The splitter features a 4" x 24" hydraulic cylinder with a 4 way Prince control valve, a heavy duty I-Beam construction, and auto return valve, a rust resistant baked-on high gloss black finish. Splitter comes fully assembled. Connection hoses to fit tractor are not included. 1 year limited warranty. Splitter dimensions are 71" L x 34" W x 27" H. |
||
| #SW0063 |
3-Point Horizontal Log Splitter |
||
;) |
10-Ton Manual Hydraulic Horizontal Log Splitter An end to the back-breaking work of splitting logs with a maul. This 10 ton splitter has 2 handles to quickly build up the pressure needed to split logs up to 18 inches long. This splitter features a steel I-Beam construction with 2 wheels on the cylinder end for easy moving in your barn or garage. Splitter dimensions are 42" L x 7" W x 12" H. |
||
| #SW0064 |
10-Ton Manual Hydraulic Horizontal Log Splitter |
||
;) |
Chain Saw Mill Turn your chainsaw into a milling machine. This handy attachment lets you cut your downed timber into boards. This mill is designed to fit chainsaws with a 20 inch or less bar length. Mill attaches to your saw without drilling bar. Cuts wood up to 13" thick and 17" wide. |
||
| #SW0065 |
Chain Saw Mill |
||
| Back To Top | |||
| Click on Photo to see bigger view! | |||
;) |
Steel Skidding Tongs Use these heavy duty, high carbon steel tongs to move your logs out into the open where they are easier to work up. The tongs feature a 3/4" dia. ring size and the jaws open from 4-1/2 " to 23" wide. |
||
| #SW0066 |
Steel Skidding Tongs |
||
;) |
3-Point Horizontal/Vertical Log Splitter Split your logs in a vertical or horizontal position. This log splitter attaches to Class I or II tractors (does not fit Nor-Trac tractors) and comes fully assembled. Splitter features a heavy duty I-Beam construction, a 4 way Prince Control Valve, auto return valve and a rust resistant baked-on glossy black finish. Connection hoses to tractor are not supplied. 1 year limited warranty. |
||
| #SW0067 |
3-Point Horizontal/Vertical Log Splitter |
||
;) |
Safety Leggings - Large These leggings, made of durable nylon, are designed to quickly jam any chainsaw on contact. Protect yourself from serious injury with these leggings. The leggings also feature an oil and water resistant outer layer and 2 quick release straps on each leg. Legs measure 18" x 10". |
||
| #SW0068 |
Safety Leggings - Large |
||
;) |
Wood Crib Put an end to that unsightly wood pile. Use these black ABS plastic ends and your 2 x 4's and make yourself a wood crib that can extend to 8 ft. L. and 4 ft. H. and sets up in seconds flat. No tools or hardware are needed to set up the wood crib. 7 year limited warranty. |
||
| #SW0069 |
Wood Crib |
||
;) |
12 Volt Chainsaw Sharpener A great tool for when you are out in the field and need to sharpen your chain saw. This sharpener operates on 12V battery power so you can hook it up to your vehicle and sharpen your saw at the job site. The sharpener runs between 22,000 and 24, 000 RPM and comes with (1) 5/32" stone, (1) 3/16" stone and (1) 7/32" stone. The sharpener takes 1/8" diameter stone shank and comes with 12V battery clips. |
||
| #SW0070 |
12 Volt Chainsaw Sharpener |
||
| Back To Top | |||
| Click on Photo to see bigger view! | |||
;) |
12-Lb. Splitting Maul w/Steel Handle Blast through those splitting chores with this splitting maul. The maul has a 12 lb. Head and a 30" steel handle to help deliver the most splitting force possible on impact. |
||
| #SW0071 |
12-Lb. Splitting Maul w/Steel Handle |
||
;) |
Safety Chainsaw Chaps These chaps, made of durable nylon, are designed to quickly jam any chainsaw on contact. Protect yourself from serious injury with these leggings. The leggings also feature an oil and water resistant outer layer and 2 quick release straps on each leg. Chaps will fit a 42" waist and have a 37" long inseam. |
||
| #SW0072 |
Safety Chainsaw Chaps |
||
;) |
Log Splitter Wedge If you don’t have a maul handy, this splitter will do the job for you. This 1" thick splitter is 12" L and 6" H. and comes pre-sharpened and ready for use. Splitter head is made of A36 carbon steel and can be attached to a steel beam using a low hydrogen rod. Splitter has a steel hardness rating of 1045. |
||
| #SW0073 |
Log Splitter Wedge |
||
;) |
4-Ft. Peavey This 4 ft. peavey has a sturdy lightweight wood handle and is fitted with a carbon steel socket and pick. Special retaining tab is forged into the pick making field repairs simple. The handle is lacquer coated and the steel features a powder coated finish. |
||
| #SW0074 |
4-Ft. Peavey |
||
;) |
Wood Blaster Log Splitter Wedge This steel wedge is designed to split logs fast and easy. |
||
| #SW0075 |
Wood Blaster Log Splitter Wedge |
||
| Back To Top | |||
| Click on Photo to see bigger view! | |||
;){kind=small} |
10" Draw Shave This 10" shave is constructed of high carbon spring steel and has a number of uses for the woodworker. Remove bark, shave logs flat for log home construction, make spokes, staves and poles. Shave features 2 handles, made of kiln dried ash, for easy accurate pulling and has a precision ground blade. Dimensions are 18" L x 6" W x 1" H. limited lifetime warranty. |
||
| #SW0076 |
10" Draw Shave |
||
;){kind=small} |
4 Ft.Timber Carrier This 4 ft. timer carrier features a cast iron clasp that is open at the top and is drawn tight by a bolt. The clasp will handle logs from 4" to 16" in diameter. The heavy duty steel swivel allows easy movement of your log, allowing passage in narrow areas. Carrier has a lacquered handle and a powder coated finish on the steel hardware. |
||
| #SW0077 |
4 Ft.Timber Carrier |
||
;) |
Firewood Marker Make sure your logs fit your fire box with this handy firewood marker. The firewood marker marks your logs for fast and accurate cutting length. Simply roll the marker down the log and it marks the log with paint at precise measured increments. Marker has an easy grip handle, wheel set for marking 16" lengths and is made of impact resistant plastic for a longer life. Marker uses contractor/surveyors inverted paint cans (not included). |
||
| #SW0078 |
Firewood Marker |
||
;) |
Log Hook This log hook is made from one piece of high carbon steel and includes a 4-1/2" wooden handle secured with a 1/4" x 5-1/4" bolt. |
||
| #SW0079 |
Log Hook |
||
;) |
Log Grab Chain Use this log grab chain to move your logs to an easier spot for working up. Grab chain features 3 ft of 5/16" G70 chain, a 5/8" YC ring with a hand ground hook that easily digs into your tree for easy moving. Hook and chain has a 4700 lb. working limit and is made of heat treated steel. |
||
| #SW0080 |
Log Grab Chain |
||
| Back To Top | |||
| Click on Photo to see bigger view! | |||
;) |
3.5 Lb. Single-Bit Axe This 3.5 lb. axe cuts through wood quick and fast. Axe features a 36" fiberglass handle for better leverage and striking impact. |
||
| #SW0081 |
3.5 Lb. Single-Bit Axe |
||
;) |
8 lb. Heavy Duty Splitting Maul This 8 lb. maul gives y ou more splitting power than lighter mauls. The 36" fiberglass handle has a molded grip that provides better control and more comfort for your hands. The 2 way splitter head allows for splitting or pounding of wedges. |
||
| #SW0082 |
8 lb. Heavy Duty Splitting Maul |
||
;) |
36" Hookaroon This handy tool features a 36" hickory handle and a drop forged steel head that is secured to the handle with a 1/4" x 1 /14" roll pin. |
||
| #SW0083 |
36" Hookaroon |
||
;) |
Chain Saw Buddy Cut up your logs and small limbs without fear of hitting your chain saw blade on the ground. The special design has two swing arms that hold the wood from underneath while two uprights hold it in place so it can’t roll or move down the blade. The chain saw buddy can be attached to electric or gas chain saws 14" or longer with no modifications or special tools. |
||
| #SW0084 |
Chain Saw Buddy |
||
;) |
6-1/2 Ft. Cant Hook This cant hook is designed for use around the sawmill. The hook features an aluminum handle with a textured rubber grip and a heat treated, zinc plated hook. The aluminum handle makes this tool stronger than the traditional wood handle and the textured grip adds more comfort and gripping strength. |
||
| #SW0085 |
6-1/2 Ft. Cant Hook |
||
| Back To Top | |||
| Click on Photo to see bigger view! | |||
|
For More Information Copyright © 2008Webmaster, Gainesville, Ga. All rights reserved. Reproduction in whole or in part in any form or medium without the express written permission of Waytogo Graphics is prohibited. |